Block‑out Resin™ – Light‑Cured Utility Resin for Bleaching Reservoirs
- Regular price
-
$40.00 - Regular price
-
- Sale price
-
$40.00
Shipping calculated at checkout.
A light-cured block-out resin designed to create controlled reservoir space during custom whitening tray fabrication.
⭐ Whitening Tray Reservoirs
Designed for creating reservoir space on plaster models before fabrication of custom whitening trays.
Designed for creating reservoir space on plaster models before fabrication of custom whitening trays.
⭐ Controlled Reservoir Placement
SPIDENT recommends approximately 0.5 mm thickness on the labial surface for whitening reservoir space.
SPIDENT recommends approximately 0.5 mm thickness on the labial surface for whitening reservoir space.
⭐ Light-Cured Workflow
Light cure for 20–40 seconds before adapting the softened tray material onto the model.
Light cure for 20–40 seconds before adapting the softened tray material onto the model.
⭐ Designed for Custom Tray Fabrication
Helps reserve consistent space for whitening material within the finished tray.
Helps reserve consistent space for whitening material within the finished tray.
SPIDENT Block Out Resin™ is a light-cured resin designed for creating reservoir space during custom whitening tray fabrication.
It is applied directly to the plaster model before thermoforming the tray material.
According to SPIDENT's technical guide, Block Out Resin should be applied approximately 0.5 mm thick on the labial surface while remaining about 1.5 mm away from the gingival margin. The material should not extend over the incisal edge or occlusal surface.
After light curing for 20–40 seconds, the softened tray material can be adapted over the model. Once cooled and trimmed, the resulting tray provides reserved space for whitening material.
According to SPIDENT's technical guide, Block Out Resin should be applied approximately 0.5 mm thick on the labial surface while remaining about 1.5 mm away from the gingival margin. The material should not extend over the incisal edge or occlusal surface.
After light curing for 20–40 seconds, the softened tray material can be adapted over the model. Once cooled and trimmed, the resulting tray provides reserved space for whitening material.
SPIDENT Whitening Tray Workflow:
1. Prepare a plaster model of the patient.
2. Apply Block Out Resin™ to the labial surfaces to create reservoir space.
3. Light cure for 20–40 seconds.
4. Adapt the softened tray material over the model and allow it to cool.
5. Trim the tray to avoid contact with gingival tissue.
1. Prepare a plaster model of the patient.
2. Apply Block Out Resin™ to the labial surfaces to create reservoir space.
3. Light cure for 20–40 seconds.
4. Adapt the softened tray material over the model and allow it to cool.
5. Trim the tray to avoid contact with gingival tissue.
For gingival protection during in-office whitening procedures, use FineDam™ light-cured resin barrier.
→ View FineDam
Create consistent reservoir space for custom whitening trays.
A light-cured block-out resin designed specifically for whitening tray fabrication.
Couldn't load pickup availability
